NXP QorIQ T1042-based Rugged 6U VME Single Board Computer

NXP QorIQ T1042-based Rugged 6U VME Single Board Computer

These are NXP QorIQ T1042-based Single Board Computers built on PowerPC Architecture. The QorIQ T1042 quad-core communication processors clocked at 1.4GHz support four integrated 64-bit e5500 Power Architecture® processor cores with high-performance data path acceleration architecture (DPAA) and network peripheral interfaces required for networking and telecommunications. Made in compliance with military standards for ruggedization.With extensive interface options and low power consumption, these are key components for Avionics and Marine LRUs.

Product Details

OVERVIEW

6U VME single board computer
NXP Power Architecture^TM
T1042 (four e5500 cores)
Onboard Xilinx 6 Series high-end FPGA for ASICs design
Xilinx CPLD for power sequencing and reset management
High-speed 3.3V 16K x 16 dual-pot SRAM
DDR3L with ECC (up to 8 GB)
128MB+256 MB NOR Flash
512KB non-volatie nvSRAM
512KB Serial EEPROM
Host/slave, VME64-compliant + 2eSST
Support 2x Independent XNC sites

Block Diagram

SPECIFICATIONS

Integrated Host Processor

T1042 up to 1.4 GHz
Four e5500 cores (single threaded)
Double-precision floating-point support -- 256 kB per core L2 cache, 256
MB platform cache

DDR3 SDRAM

Up to 8 GB DDR3L
SDRAM with ECC
Double Bank

Flash Memory

128MB NOR Boot Flash memory
256MB NOR Application Flash memory

Backplane

Full VME64 Host/slave capable with 2eSST support

Mezzanine Slots

Two XMC slots
Up to four lane PCI-e (Gen2.0)

Gigabit Ethernet

2x 10/100/1000BASE-T Ethernet
1x routed to front panel; 1x routed to backplane

Rear I/O

4x RS-232 UART ports; 2x routed on backplane and 2x on front panel
2x USB 2.0
2x Serial ATA (3 Gb/s)
1x Single lane mini PCI-e (Gen 2.0)
1x XGA RGB Video Output on backplane
Up to 8, 2.5V-tolerant GPIO on front panel and 10; 3.3V tolerant GPIOs; connected to FPGA through backplane
3x SPI : 1x on each XMC connector and 1x on front panel
1x I2C on front panel